2.7~3.8m³/min Two Stage Screw Air Compressor 22KW Air Cooling 30SA
⊙ Features:
Sturdy construction
Easy installation
Power efficient
⊙ Schematics
| 1. Air Filter |
9. Oil Temperature Control Valve |
| 2. Air-in Easing Value |
10. Oil Filter |
| 3. Principal Screw Machine |
11. One-way Shut-off Valve |
| 4. Oil Air Separator |
12. Pressure Gage |
| 5. Oil Air Separating Filter Core |
13. Safety Valve |
| 6. Minimum Pressure Valve |
14. Vent Valve |
| 7. Radiator with Aluminum Alloy Fans |
15. Compressed Air Dry Separator |
| 8. Return Check Valve |
16. Motor |
⊙ Type air compressor pause
| Specifacation |
Cooling Style |
Air Capacity
(m³/min) |
Discharge Pressure
(bar) |
Motor Power
(kw) |
Speed
(r/min) |
Voltage(V)
Frequency(Hz) |
Cooling Air Capacity
(m3/min) |
Joint pipe Size
(inch) |
Total Weight
(kg) |
Dimension(L*W*H)
(mm) |
| SRC-7.5SA |
Air cooling |
0.85 |
7 |
5.5 |
2980 |
380V50Hz |
80 |
1/2″ |
230 |
850*735*990 |
| 0.8 |
8 |
| 0.6 |
10 |
| 0.4 |
13 |
| SRC-10SA |
Air cooling |
1.1 |
7 |
7.5 |
2980 |
380V50Hz |
80 |
1/2″ |
410 |
850*735*990 |
| 1 |
8 |
| 0.8 |
10 |
| 0.6 |
13 |
| SRC-15SA |
Air cooling |
1.7 |
7 |
11 |
2980 |
380V50Hz |
80 |
1/2″ |
475 |
1100*750*1150 |
| 1.6 |
8 |
| 1.4 |
10 |
| 1.2 |
13 |
| SRC-20SA |
Air cooling |
2.4 |
7 |
15 |
2980 |
380V50Hz |
100 |
1″ |
560 |
1350*850*1150 |
| 2.2 |
8 |
| 2.1 |
10 |
| 1.7 |
13 |
| SRC-25SA |
Air cooling |
3.1 |
7 |
18.5 |
2980 |
380V50Hz |
145 |
1″ |
580 |
1350*850*1150 |
| 2.9 |
8 |
| 2.7 |
10 |
| 2.2 |
13 |
| SRC-30SA |
Air cooling |
3.8 |
7 |
22 |
2980 |
380V50Hz |
145 |
1″ |
640 |
1350*850*1150 |
| 3.5 |
8 |
| 3.2 |
10 |
| 2.7 |
13 |
| SRC-40SA |
Air cooling |
5.2 |
7 |
30 |
2980 |
380V50Hz |
255 |
1″ |
900 |
1350*850*1150 |
| 5 |
8 |
| 4.3 |
10 |
| 3.7 |
13 |
| SRC-50SA |
Air cooling |
6.4 |
7 |
37 |
2980 |
380V50Hz |
255 |
1½″ |
980 |
1550*950*1450 |
| 5.9 |
8 |
| 5.5 |
10 |
| 4.8 |
13 |
| SRC-60SA |
Air cooling |
8 |
7 |
45 |
2980 |
380V50Hz |
255 |
1½″ |
1050 |
1550*950*1450 |
| 7.7 |
8 |
| 7 |
10 |
| 5.8 |
13 |
| SRC-75SA |
Air cooling |
10.5 |
7 |
55 |
2980 |
380V50Hz |
268 |
2″ |
1250 |
1900*1240*1700 |
| 9.8 |
8 |
| 8.7 |
10 |
| 7.5 |
13 |
| SRC-90SA |
Air cooling |
11.7 |
7 |
65 |
2980 |
380V50Hz |
268 |
2″ |
1530 |
1900*1240*1700 |
| 11.3 |
8 |
| 9.5 |
10 |
| 8.4 |
13 |
◆ Consider the quality of compressed air.
Generally, compressed air produced by air compressors contains a certain amount of lubricating oil and a certain amount of water. In some cases, oil and water are forbidden. At this time, attention should be paid not only to the selection of air compressors, but also to the addition of ancillary devices when necessary.
The solution is to select a non-lubricated air compressor. The air compressor cylinder is basically oil-free, and its piston rings and fillers are generally polytetrafluoroethylene. But this machine also has shortcomings, poor lubrication, high failure rate; PTFE is also a harmful substance, food, pharmaceutical industry can’t use; no lubrication air compressor can only achieve gas transmission without oil, can’t do without water. The second and commonly used method is to add the air compressor (either) to the first or second stage purification device or dryer. This device can make the air of air compressor contain neither oil nor water, and make the oil and water content in compressed air less than 5 ppm, which can meet the technological requirements.
◆ We should consider the safety of air compressor operation.
Air compressor is a kind of machine working under pressure, which is accompanied by temperature rise and pressure, and its safety should be put in the first place. The state implements a standardized "two certificates" system for the production of air compressors, i.e. air compressor production license and pressure vessel production license (gas storage tank). Therefore, when selecting air compressor products, we must strictly examine the "two certificates". Usually the quality assurance system of certified manufacturer is perfect, there will be no major quality problems, even if there are some problems, the manufacturer will be responsible for three packages.
Product Tags:
|
|
2980 r/min Two Stage Air Compressor Rotary Screw Type Sturdy Construction Images
|
